DisplayPort & HDMI Bandwidth Calculator
Determine exact uncompressed and VESA DSC 1.2a data rates in Gbps. Instantly verify if your monitor, TV, and GPU can run 4K 240Hz, 1440p 360Hz, or 8K HDR over HDMI 2.0, HDMI 2.1, DP 1.4, or DP 2.1 UHBR20.
Display Parameters
4K UHD @ 240Hz (10-bit RGB)
Requires VESA CVT-RBv2 blanking payload
Visually lossless realtime compression
Hardware & Port Compatibility Matrix Effective Data Payload
Understanding DisplayPort 2.1, HDMI 2.1 & DSC Compression
As modern gaming monitors evolve beyond 4K 240Hz, 1440p 540Hz, and 8K 60Hz, physical cable bandwidth has become a primary bottleneck. Connecting a high-refresh monitor to a graphics card requires more data throughput than older DisplayPort 1.4 or HDMI 2.0 cables can supply without compromises.
Raw Bandwidth vs Effective Payload
Every video connection loses a fraction of its advertised signaling rate to line-encoding overhead. DisplayPort 1.4 and HDMI 2.0 use 8b/10b encoding (20% loss). HDMI 2.1 uses 16b/18b encoding (11.1% loss, maxing at 42.6 Gbps). DisplayPort 2.1 uses 128b/132b encoding (just 3% loss), allowing UHBR20 to deliver an unprecedented 77.37 Gbps of effective video data.
Is VESA DSC (Display Stream Compression) Really Lossless?
VESA DSC 1.2a is a low-latency, slice-based compression algorithm standardized by VESA. It compresses video data up to 3:1 ratio in real-time with less than 1 scanline of latency (sub-millisecond). Double-blind visual tests confirm that DSC artifacts are imperceptible to human eyes during active gaming and professional desktop tasks.
Display Standards Quick Reference Chart
| Standard | Raw Rate | Effective Data Payload | Encoding | Max Native Capability |
|---|---|---|---|---|
| HDMI 2.0b | 18.0 Gbps | 14.4 Gbps | 8b/10b | 4K 60Hz (8-bit) / 1440p 144Hz |
| DisplayPort 1.4a | 32.4 Gbps | 25.92 Gbps | 8b/10b | 4K 120Hz (8-bit) / 1440p 240Hz |
| HDMI 2.1 (FRL6) | 48.0 Gbps | 42.6 Gbps | 16b/18b | 4K 144Hz (10-bit HDR) / 8K 60Hz (DSC) |
| DisplayPort 2.1 (UHBR10) | 40.0 Gbps | 38.69 Gbps | 128b/132b | 4K 120Hz (10-bit HDR) native |
| DisplayPort 2.1 (UHBR13.5) | 54.0 Gbps | 52.22 Gbps | 128b/132b | 4K 180Hz (10-bit HDR) native |
| DisplayPort 2.1 (UHBR20) | 80.0 Gbps | 77.37 Gbps | 128b/132b | 4K 240Hz (10-bit HDR) NATIVE |
Frequently Asked Questions
Can HDMI 2.1 run 4K 240Hz without DSC compression? ↓
No. Uncompressed 4K at 240Hz with 10-bit HDR requires approximately 68.85 Gbps of effective bandwidth. HDMI 2.1 has an effective payload cap of 42.6 Gbps. Therefore, running 4K 240Hz on HDMI 2.1 always requires VESA DSC 1.2a compression enabled. Only DisplayPort 2.1 UHBR20 (77.37 Gbps) can run 4K 240Hz 10-bit HDR completely uncompressed.
Does NVIDIA RTX 40-series support DisplayPort 2.1? ↓
No. NVIDIA RTX 40-series GPUs (including RTX 4090, 4080 SUPER, and 4070 Ti SUPER) are limited to DisplayPort 1.4a and HDMI 2.1. Full DisplayPort 2.1 support arrived with AMD Radeon RX 7000/8000 series and NVIDIA RTX 50-series (Blackwell).
What happens if my display bandwidth exceeds cable capacity? ↓
If bandwidth is exceeded without DSC, your GPU driver will automatically clamp the refresh rate (e.g., dropping from 240Hz to 120Hz or 60Hz), downgrade color depth from 10-bit to 8-bit, or degrade chroma subsampling from RGB/4:4:4 down to blurry YUV 4:2:0.